UNV4300-UNV4399
UNV4300E Database operation failed: file db operation (returncode) error message
Description
Database error on file file when performing db operation with return code - returncode error message - error message.
Severity
Error or Warning
System Action
The action of the program depends on the context in which the error occurred.
User Action
Contact Stonebranch Customer Support for assistance.
Component
Universal Enterprise Controller
UNV4301D Database error: 'error'.
Description
A database error occurred. The message provides detailed diagnostic information in the error field.
Severity
Diagnostic
System Action
The action of the program depends on the context in which the error occurred.
User Action
Contact Stonebranch Customer Support for assistance.
Component
Universal Enterprise Controller
UNV4302E Error reading ddname 'ddn': errno, reason
Description
An error occurred reading the JFCB of ddname ddn. The error number is errno, and the error reason is reason.
Severity
Error
System Action
The program terminates.
User Action
Correct the error and restart. Contact Stonebranch customer support if unable to resolve the error.
Component
Universal Enterprise Controller
UNV4303E Error mounting USS file system: func, errno, reason.
Description
An error occurred mounting an USS file system that contains the UEC databases. Function func returned an error code errno which is described by reason.
Severity
Error
System Action
The program terminates.
User Action
Determine what action to take based on the information provided by the error reason. Contact Stonebranch Customer Support if assistance is required.
Component
Universal Enterprise Controller
UNV4305E SAP logon error: message.
Description
An error has occurred in the RFC logon operation. Message gives information about the error.
Severity
Error
System Action
The logon operation will be attempted again at the next polling interval.
User Action
Check for additional messages issued by UEC. Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4306E SAP RFC error: operation, message.
Description
An error has occurred in an RFC operation. Operation gives the RFC operation that experienced an error. Message gives information about the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4307E SAP RFC error: operation no message available.
Description
An error has occurred in an RFC operation. Operation gives the RFC operation that experienced an error. No message is available to give additional information.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4308E Set XMI audit level failed: (msgNo) bapiStr
Description
An error occurred while attempting to set the SAP XMI audit level. At this point, UEC has successfully logged on to the SAP BC-XBP interface. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4309E Get remote system time failed: (msgNo) bapiStr
Description
An error occurred getting the remote system time for an SAP R/3 system. At this point, UEC is logging on to the SAP R/3 system. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4310W RFC call timed out: functionName.
Description
An RFC call did not complete within the number of seconds specified by the UEC command line parameter sap_rfc_timeout.
Severity
Warning
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
UNV4311I Retrying RFC call: functionName.
Description
A failed RFC call is about to be retried. The function is identified as funcName.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
UNV4312E RFC retry count exceeded: RfcRetryCount failed retry attempts.
Description
An RFC call could not be completed successfully. The RFC call was retried RfcRetryCount times.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. Verify the state of the network. Verify the state of the SAP R/3 application server. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4313E XMB logon failed: (msgNo) bapiStr
Description
An error occurred in the XMB logon process. At this point, UEC is logging on to the SAP BC-XMB interface. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4314W XMI logoff failed: (msgNo) bapiStr
Description
An error occurred while UEC was logging off of the SAP BC-XBP interface. The error originated in a BAPI called on the SAP R/3 system. Error gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Warning
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4315I Retrying RFC logon.
Description
A failed RFC logon is about to be retried.
Severity
Informational
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
UNV4316E RFC logon retry count exceeded: RfcLogonRetryCount failed retry attempts.
Description
An RFC connection could not be established. The failed logon was retried RfcLogonRetryCount times. All retry attempts failed.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. Verify the state of the network. Verify the state of the SAP R/3 application server. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4317E Job select failed: (msgNo) bapiStr
Description
An error occurred in the job selection process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4318E Database corruption detected. Recovery for database is required.
Description
The database is corrupted. The UEC database recovery procedure needs to be performed as stated in the manual.
Severity
Error
System Action
The program terminates.
User Action
Perform the UEC database recovery procedure as stated in the manual.
Component
Universal Enterprise Controller
UNV4319E User (user) does not have permissions to execute message. Session Terminated.
Description
The user attempted to execute a message on the UEC server without having the necessary permissions.
Severity
Error
System Action
The client session terminates.
User Action
Contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4320W Managed state of broker differs from UEC database: broker - (broker state), UEC - (uec state).
Description
Upon polling broker the managed mode state of broker differs from UEC database. The broker's managed mode state is broker state. The managed state in the UEC database is uec state.
Severity
Warning
System Action
The program continues.
User Action
Use UEC Administration to set the broker to the correct managed mode setting.
Component
Universal Enterprise Controller
UNV4321W The parameter parameter will be ignored.
Description
A parameter was specified but was not valid in its usage.
Severity
Warning
System Action
The program continues.
User Action
Review the documentation for the command and parameter.
Component
Universal Enterprise Controller
UNV4322E Date range error: reason
Description
A valid date range cannot be established using the specified starting and/or ending dates. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Make sure dates are in the format of YYYY/MM/DD and times are in the format of HH:MM:SS. Also, make sure any start date and time specified is not greater than the specified end date and time.
Component
Universal Enterprise Controller
UNV4323E -stime and -etime parameters are required for export of events
Description
Start time and end time values are required when exporting events.
Severity
Error
System Action
The program terminates.
User Action
Make sure to include both the -stime and -etime parameters when performing an export of events.
Component
Universal Enterprise Controller
UNV4324I No UEC records found with matching specifications."
Description
A request was made to export records but none were found.
Severity
Info
System Action
The program continues.
User Action
Modify your options to identify records defined on the Universal Enterprise Controller.
Component
Universal Enterprise Controller
UNV4325I Commit record status. Tracking: tracking,User: user, Session: sid
Description
The user has changed the status of a commit. The tracking number is tracking. The user id is user. The session id is sid.
Severity
Info
System Action
The program continues.
User Action
No action required.
Component
Universal Enterprise Controller
UNV4326E The user username failed to login to UEC.
Description
The user username failed to login to UEC.
Severity
Error
System Action
The program terminates.
User Action
Retry to execute with a valid user name and password.
Component
Universal Enterprise Controller
UNV4327E Error receiving event messages: func, errno, reason
Description
An error occurred receiving Universal Subsystem Events from an agent.
Severity
Error
System Action
The program continues.
User Action
Contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4328W Invalid socket during broker poll: name, addr:port, step1, step2
Description
An invalid socket was detected during a broker poll. The broker's defined TCP/IP host address is addr listening on port port. The processing steps that failed are step1 and step2.
Severity
Warning
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
UNV4329E Unable to locate SDO reference field: field, index
Description
There was a failure in retrieving a field from the SDO reference by using a corresponding index value.
Severity
Error
System Action
The program terminates.
User Action
None.
Component
Universal Enterprise Controller
UNV4330E location - func failed: (errno) reason
Description
A call to a system function at location location, identified by func, was not successful. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The action of the program depends on the context in which the error occurred.
User Action
Contact Stonebranch customer support if unable to identify and resolve the problem.
Component
Universal Enterprise Controller
UNV4331W Broker does not support managed mode: broker, addr:port
Description
An attempt was made to set a broker to managed mode where managed mode is not supported for that version of the broker. TCP/IP host address is addr listening on port port.
Severity
Warning
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
UNV4332W Agent broker (ip) is in managed mode. Agent is defined in UEC as not using managed mode."
Description
Upon polling broker at ip the managed mode state of broker differs from the UEC database.
Severity
Warning
System Action
The program continues.
User Action
Use UEC Administration to set the broker to the correct managed mode setting.
Component
Universal Enterprise Controller
UNV4333W Agent broker (ip) is not in managed mode. Agent was defined in UEC as using managed mode."
Description
Upon polling broker at ip the managed mode state of broker differs from the UEC database.
Severity
Warning
System Action
The program continues.
User Action
Use UEC Administration to set the broker to the correct managed mode setting.
Component
Universal Enterprise Controller
UNV4334W Unable to acquire next group id. Maximum groups exceeded.
Description
A request was made to obtain the next available group id but the maximum had already been reached.
Severity
Warning
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
UNV4335I Performing database conversion.
Description
Indicates a database conversion has started with -convert option.
Severity
Informational
System Action
None
User Action
None required.
Component
Universal Enterprise Controller
UNV4336W No conversion performed. Database previously established.
Description
During the -convert option it was detected that the database was previously established.
Severity
Warning
System Action
The program terminates.
User Action
None.
Component
Universal Enterprise Controller
UNV4337I Database conversion failed.
Description
During the -convert option errors were detected.
Severity
Informational
System Action
The program terminates.
User Action
None.
Component
Universal Enterprise Controller
UNV4338I Database conversion completed.
Description
Database conversion completed successfully.
Severity
Informational
System Action
The program terminates.
User Action
None.
Component
Universal Enterprise Controller
UNV4339E func failed: (errno) reason
Description
A call to a system function, identified by func, was not successful. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support if unable to identify and resolve the problem.
Component
Universal Enterprise Controller
UNV4340E Cannot start. Another UEC is running.
Description
UEC is already running. Two UEC's cannot execute and share common resources at the same time.
Severity
Error
System Action
The program terminates.
User Action
Stop the currently running UEC and restart this one.
Component
Universal Enterprise Controller
UNV4341E System failure: function, errno, reason
Description
An error occurred in the operating system function function. The error number is errno, and the error reason is reason.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch Customer Support.
Component
Universal Enterprise Controller
UNV4342E Error reading ddname 'ddn': errno, reason
Description
An error occurred reading the JFCB of ddname ddn. The error number is errno, and the error reason is reason.
Severity
Error
System Action
The program terminates.
User Action
Correct the error and restart. Contact Stonebranch customer support if unable to resolve the error.
Component
Universal Enterprise Controller
UNV4343E HFS or zFS data set dsn already in use.
Description
A Universal Broker is already running and using the HFS or zFS data set identified by dsn. The HFS or zFS data sets cannot be shared.
Severity
Error
System Action
The program terminates.
User Action
If the intention is to run another Broker, HFS or zFS data sets must be allocated for each Broker.
Component
Universal Enterprise Controller
UNV4344W Error on setting managed mode. Broker: broker, addr:port Operation: operation Error: error.
Description
During the managed mode operation the broker reported an error.
Severity
Warning
System Action
The program continues.
User Action
None.
Component
Universal Enterprise Controller
UNV4345E XML parsing failure for document at line: line, col: column, - error."
Description
An error occurred in the XML parser in document at position line and column.
Severity
Error
System Action
The action of the program depends on the context in which the error occurred.
User Action
Contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4346W Access denied on broker: broker, address:port during operation operation. Message from broker: message.
Description
An attempt was made to perform operation on broker but
failed due to broker access denial.
Severity
Warning
System Action
The program continues.
User Action
Review ACL's for the broker to determine if this is the desired behavior.
Component
Universal Enterprise Controller
UNV4347E Missing SAF key ring name, which is required for system SSL.
Description
When the system implementation of SSL is specified, a SAF key ring name is required.
Severity
Error
System Action
The program terminates.
User Action
Specify a SAF key ring name to be used for the SSL digital certificate requirements.
Component
Universal Enterprise Controller
UNV4348A SSL implementation: impl
Description
Displays the SSL implementation used for the SSL network protocol.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Enterprise Controller
UNV4349I State data cleanup routine starting...
Description
An informational message to indicate that a state data cleanup routine has begun.
Severity
Info
System Action
The program continues.
User Action
None required.
Component
Universal Enterprise Controller
UNV4350I State data cleanup routine complete.
Description
An informational message to indicate that a state data cleanup routine has completed.
Severity
Info
System Action
The program continues.
User Action
None required.
Component
Universal Enterprise Controller
UNV4351W Session sesid has exceeded send queue limit. Messages Dropped.
Description
The client session sesid has exceeded the maximum number of messages allowed on the send queue and messages were dropped as a result.
Severity
Warning
System Action
The program continues.
User Action
No action required.
Component
Universal Enterprise Controller
UNV4352E Comm thread socket open error: func, errno, reason
Description
The network connection used to assist the primary comm thread could not be opened. func is the name of the function in which the error occurred. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program continues.
User Action
If the problem persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4353E Error establishing local comm session: func, errno, reason
Description
An error occurred establishing a session with the primary comm thread. The function that failed is identified by field 'func'. Field p>errno is the error number, and field reason is an explanation of the error.
Severity
Error
System Action
The program continues.
User Action
If the problem persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4354E Cannot access temporary directory 'dir': reason
Description
The temporary directory, whose entire path is specified by dir, could not be accessed. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Check the value of the temporary_directory entry in the Universal Enterprise Controller configuration file. Make sure that directory exists and that the user account running the controller program has sufficient access to that directory. If the directory does not exist, simply create it; re-installation should not be necessary.
Component
Universal Enterprise Controller
UNV4355E The dump request failed in function CEE3DMP: msgno.
Description
At the request of a console dump request, an LE dump was initiated. The CEE3DMP function failed to produce the dump. The LE message number is specified by msgno.
Severity
Error
System Action
Processing continues.
User Action
CEE3DMP message numbers are documented in the IBM LE Programming Reference.
Component
Universal Enterprise Controller
UNV4356I Session sesid using client application app.
Description
The client session sesid is using the UEC client application as identified by app.
Severity
Informational
System Action
The program continues.
User Action
No action required.
Component
Universal Enterprise Controller
UNV4357I UEC database: type file system dsn mounted at mount.
Description
The message provides information about the USS file system used for the UEC database. type identifies the type of file system, dsn is the data set name containing the file system, and mount is the mount point in the USS file system.
Severity
Informational
System Action
Processing continues.
User Action
No action necessary.
Component
Universal Enterprise Controller
UNV4358W Unable to add group (id) name.
Description
A group was unable to be added to the group database when using the -convert option. id is the internal identifier used by UEC for the group. name is the name of the group.
Severity
Warning
System Action
Processing continues.
User Action
No action necessary.
Component
Universal Enterprise Controller
UNV4359W Unable to add user (id) name.
Description
A user was unable to be added to the user database when using the -convert option. id is the internal identifier used by UEC for the user. name is the name of the user.
Severity
Warning
System Action
Processing continues.
User Action
No action necessary.
Component
Universal Enterprise Controller
UNV4360W Unable to add agent (id) name.
Description
An agent was unable to be added to the agent database when using the -convert option. id is the internal identifier used by UEC for the agent. name is the name of the agent.
Severity
Warning
System Action
Processing continues.
User Action
No action necessary.
Component
Universal Enterprise Controller
UNV4361E Confirm jobs failed: (msgNo) bapiStr
Description
An error occurred in the job confirmation process. The error originated in a BAPI called on the SAP R/3 system. msgNo gives the BAPI message number. bapiStr gives information about the error, including the name of the BAPI that generated the error.
Severity
Error
System Action
The program terminates.
User Action
Check for additional messages issued by UEC. The SAP R/3 syslog may contain additional information about the error.
Try to determine the cause of the error. If a cause cannot be found and the error condition persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4362A Logon error: msg.
Description
This message is printed as an alert notification that a logon attempt for the SAP system failed. msg provides the reason for the failure.
Severity
Alert
System Action
The program continues. The SAP system will be removed from future polling cycles until the logon credentials for the SAP system are modified. This is done to prevent UEC from exceeding logon attempts for a user and locking the SAP user account. When the logon credentials are modified, UEC will resume normal polling for the SAP system.
User Action
Use the UEC admin client to correct the logon credentials for the specified SAP system.
Component
Universal Enterprise Controller
UNV4363A Unable to logon to SAP system name: msg.
Description
This message is printed as an alert notification that a logon error occurred for SAP system named name. msg provides the reason for the logon error.
Severity
Alert
System Action
The program continues. The SAP system will be removed from future polling cycles until the logon credentials for the SAP system are modified. This is done to prevent UEC from exceeding logon attempts for a user and locking the SAP user account. When the logon credentials are modified, UEC will resume normal polling for the SAP system.
User Action
Use the UEC admin client to correct the logon credentials for the specified SAP system.
Component
Universal Enterprise Controller
UNV4364A Unable to connect to SAP system name: msg.
Description
This message is printed as an alert notification that the SAP system named name did not respond to a query request. msg provides the reason the SAP system could not be reached.
Severity
Alert
System Action
The program continues. The SAP system will be queried later and if it responds, an alert message will be issued to record the event.
User Action
No action is required.
Component
Universal Enterprise Controller
UNV4365A Unable to connect to SAP system: msg.
Description
This message is printed as an alert notification that the SAP system did not respond to a query request. msg provides the reason the SAP system could not be reached.
Severity
Alert
System Action
The program continues. The SAP system will be queried later and if it responds, an alert message will be issued to record the event.
User Action
No action is required.
Component
Universal Enterprise Controller
UNV4366A Groups: groupList
Description
Displays the list of groups that the broker is being added to or, removed from on the Enterprise Controller. groupList is the list of Groups.
Severity
Audit
System Action
None.
User Action
None required.
Component
Universal Enterprise Controller
UNV4367E Broker name bkrName was not deleted from group(s): groupList.
Description
The identified broker name was not successfully deleted from the specified list of groups. bkrName is the broker name that was not successfully deleted from the list of groups specified by groupList.
Severity
Error
System Action
The program continues.
User Action
Look at the indicated broker name and verify that it still exists in the specified list of groups. If the problem persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4368I Broker Name bkrName was successfully deleted from group(s):
groupList.
Description
The identified broker name was successfully deleted from the list of groups. bkrName is the broker name that was deleted from the group list specified by groupList .
Severity
Informational
System Action
None
User Action
None Required.
Component
Universal Enterprise Controller
UNV4369I Broker definition definitionNum for broker name bkrName was successfully added to groups: groupList.
Description
The identified broker definition within the UECLoad Load File was
successfully added to the groups specified in groupList. definitionNum is the record number of the broker definition that was added. bkrName is the broker name that was added.
Severity
Informational
System Action
None
User Action
None Required.
Component
Universal Enterprise Controller
UNV4370E Broker definition was not accepted by UEC for group list: groupList.
Description
The specified broker definition was not accepted by Enterprise Controller for the group list specified by groupList.
Severity
Error
System Action
The program continues.
User Action
Look at the specified broker definition and verify that it does not already exist on the Enterprise Controller for the groups specified. If the problem persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4371I Broker definition was successfully added to UEC for group list: groupList.
Description
The specified broker definition was successfully added to the Enterprise Controller for the group list specified by groupList.
Severity
Informational
System Action
None
User Action
None Required.
Component
Universal Enterprise Controller
UNV4372E Errors were encountered processing definition definitionNum for broker name bkrName.
Description
The identified broker definition within the UECLoad Load File is invalid. definitionNum is the record number of the broker definition not accepted. bkrName is the broker name that was not accepted by UEC.
Severity
Error
System Action
The program continues.
User Action
Look at the indicated record within the Load File and verify that it does not already exist on the Universal Enterprise Controller. If the problem persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4373E message
Description
UEC returned message bkrName
Severity
Error
System Action
The program continues.
User Action
Component
Universal Enterprise Controller
UNV4374A Broker has not yet been polled.
Description
This message is printed as an on-demand alert notification, indicating that no query attempts have completed on the broker. This alert maybe printed in response to an on-demand broker status request.
Severity
Alert
System Action
The program continues.
User Action
No action is required.
Component
Universal Enterprise Controller
UNV4375E Error opening local interface: addr, func, errno, reason
Description
The UNIX domain socket interface used to receive commands from local clients could not be opened. The UNIX domain socket address is addr. func is the name of the function that prompted the error. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
If the problem persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4376E Error opening network interface: func, errno, reason
Description
The network interface used to receive commands from the clients could not be opened. func is the name of the function that prompted the error. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
If the problem persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4377E Codepage conversion error for textItem - func failed: (errno) reason
Description
A codepage conversion error occurred while attempting to convert text item textItem. The underlying function where the error occurred is identified by func. errno is the error number. reason is an explanation of the error.
Severity
Error
System Action
The program terminates.
User Action
Contact Stonebranch customer support if unable to identify and resolve the problem.
Component
Universal Enterprise Controller
UNV4378E Universal Broker PID file: pidfile exist. Broker may be currently running.
Description
The Universal Enterprise Controller found an instance of the Controller process already running. pidfile is the path to the existing PID file which contains the process ID of the running Universal Enterprise Controller.
Severity
Error
System Action
The program terminates.
User Action
Make sure no other Universal Enterprise Controller is currently running. If problem persists, contact Stonebranch customer support.
Component
Universal Enterprise Controller
UNV4379E Error initializing for event generation: func, errno, reason.
Description
An error occurred initializing for event generation. The function that encountered the error is func. The error number returned is errno. An explanation of the error is reason.
Severity
Error
System Action
The program continues.
User Action
Determine the cause of the error based upon this message and any messages issued prior to this one. If you need assistance, contact Stonebranch Customer Support.
Component
Universal Enterprise Controller
UNV4380I Universal Enterprise Controller is executing without superuser permission.
Description
Universal Enterprise Controller is executing with a user identifier that does not have superuser permission. UEC typically executes with superuser permission in order to provide its full range of services. However the product can be configured with specific services diabled or access predefined so that superuser access is not required.
Severity
Informational
System Action
Processing continues. If the product is not configured to run without superuser permission, potential security access errors may occur.
User Action
No action required.
Component
Universal Enterprise Controller